MDR
1 September 2023
Unlocking Success in Orthopedic Medical Device Startups: A Guide to Profitable Exits
In this guide, we will explore the optimal approach for developing a successful startup in...
News Articles
MDR
2 August 2023
FDA versus MDR for classification of medical devices
FDA versus MDR for classification of medical devices Medical devices appeal to the imagination and...
MDR
28 July 2023
Key Strategies for Developing a Successful Orthopedic Medical Device Startup
Introduction Discover the best approach to develop a startup in the orthopedic medical device...
MDR
28 July 2023
Harnessing Orthosis Development, Innovation, and Product Improvement
Introduction Often, we hear that an orthosis is fully developed. There are no significant innovation...
MDR
27 June 2023
What is CE Marking Required for Medical Devices?
Understanding the significance of CE marking for medical devices is crucial when marketing these products...
MDR
27 June 2023
The Cost of Developing a Medical Device: Insights from Medical Consulting and CE Mark
Understanding Medical Device Development Developing a medical device involves a complex and highly regulated process....
MDR
4 November 2022
Small print matters | Lessons Learned from MedTech company BAAT Medical
Lessons learned from MedTech company Baat Medical: Small print matters Why we write on this...
MDR
28 October 2022
Spinal Implant Upgrades
Surgalign launches improved spinal implants With a broadened choice in sizes and a patented 3D-printed...
MDR
9 September 2022
Baat Medical in the USA
BAAT Medical in the USA Gary Antonius represented BAAT medical during the September Dutch royal...
MDR
19 August 2022
USA health sciences | Medical Technology Startups
LSH mission california | Flux Robotics and Baat Medical MedTech Startup Event with Baat Medical...
MDR
12 November 2021
Tips for Medical Device Startups
Medical Device Startups come to Baat Medical Author: Ortho Spine News and Elizabeth Hofheinz, M.P.H.,...
MDR
2 September 2020
ANSER Clavicle pin – FDA approval
The ANSER Clavicle pin received FDA approval. BAAT Medical is Legal Manufacturer. Message from the...
MDR
21 April 2020
Mondkapje | (FFP) Mondmasker – Fabrikanten
Ik kan mondkapjes en/of mondmaskers maken, wat nu? Een praktisch stappenplan voor nieuwe fabrikanten Introductie...
MDR
15 August 2019
Regulatory aspects of 3D-printed surgical implants
A very interesting article was recently published which highlights the regulatory aspects of custom made...
MDR
18 July 2019
Publication on the Clavicula Pin
Inspired by the Clavicula Pin project our partner Paul Hoogervorst proposed to create a paper...
MDR
26 April 2019
Stimulering grote innovatieprojecten
Ontwikkeling injecteerbare hydrogel Stimulering grote innovatieprojecten EFRO OP-Oost 2014-2020 Projectschets: ontwikkeling injecteerbare hydrogel Artrose meest...
MDR
26 April 2019
Herstel kraakbeen als succesvol alternatief voor knieprothese
Herstel kraakbeen als succesvol alternatief voor knieprothese Het UMC Utrecht een nieuwe behandeling ontwikkeld waarmee...
MDR
5 March 2019
Design awards
Several of the products we developed in collaboration with our partners received design awards: IF...
MDR
28 February 2019
The Swing Phase Lock knee joint
The Swing Phase Lock, an innovative knee joint for knee orthotics that we developed for...
MDR
22 February 2019
Some of our results
Are you interested in some the Orthopaedic and Orthotic products we developed for our customers?...
MDR
7 February 2019
Arthrosave – Publicatie in de Volkskrant
Trots op een publicatie in de Volkskrant over de Arthrosave, een product dat we in...
MDR
25 January 2019
Gannet Implant – scientific publication
Another scientific publication on the Gannet Implant that we developed (a Dynamic Locking Blade Plate...
MDR
7 January 2019
Innovations
Not all innovations make it to market. There is even a Museum of Failure that...
MDR
18 December 2018
Arthrosave – Knee Reviver
Knieënredder Als je door artrose weinig of geen kraakbeen meer in je kniegewricht hebt, is...
MDR
5 November 2018
Eindverslag Subsidieprojecten TENDER Transitie II en Pieken / REP- SNN
The goal of the BPF is to create a fixation point in a bone part...